Product Details
Place of Origin: Chongqing, China
Brand Name: JEFFER
Certification: ISO9001， ISO14001， ISO45001
Model Number: JEFFER-F
Payment & Shipping Terms
Minimum Order Quantity: 1 set
Price: Negotiable
Packaging Details: Wooden case, tray, steel frame, etc
Delivery Time: 90 days after received the down payemnt
Payment Terms: T/T, L/C
Supply Ability: 1 set per 3 months
Capacity: |
50ton |
Material: |
Electric Fused AZS , Silicate Brick, MS |
Kind Of Glass: |
Borosilicate |
Color: |
Flint |
Operation Hour: |
24 Hours |
Kind Of Fuel: |
Heavy Oil |
Control Method: |
DCS, PLC |
Waranty: |
One Year |
Application: |
Bowl, Dishes |
After-salses Service: |
Engineering Overeas Service Available |
Capacity: |
50ton |
Material: |
Electric Fused AZS , Silicate Brick, MS |
Kind Of Glass: |
Borosilicate |
Color: |
Flint |
Operation Hour: |
24 Hours |
Kind Of Fuel: |
Heavy Oil |
Control Method: |
DCS, PLC |
Waranty: |
One Year |
Application: |
Bowl, Dishes |
After-salses Service: |
Engineering Overeas Service Available |
Heavy Oil Energy End Fired Furance Container Glass Materials Melter
1. Brief Description of Heavy Oil Energy End Fired Furance Container Glass Materials Melter
JEFFER Engineering has designed and supplied a variety of glass melting furnaces for the customers in China and aboard, ranging from the end fired furnace to the electric furnace; from very small scale pot furnace to large float glass furnace and constructions.
We use 3D modeling design, and combine the customer's product characteristics, site conditions and individual requirements to ensure the accuracy of the design, avoid rework and on-site adjustments.
Compared with the cross combustion furnace with the same melting area, the end combustion furnace has the advantages of high heat utilization rate, simple structure, small floor area, low investment cost, simple operation and simple maintenance.
The flame coverage area of the end combustion furnace is small, and the flame reversal brings about periodic temperature fluctuation and hot spot movement.
| Item | Description | Specification |
| 1 | DCS | Centralized management, decentralized control, with design ideas of "overview to details" |
| 2 | PLC | Independent Section control by SCADA (Supervisory Control And Data Acquisition) control network system, i.e. dat acquisition and supervisory control system |
3. Furnace Structure
It is the part which melts batched materials and Clearing and homogenizes glass liquid. In the upper space of the melting section is referred to as the flame space, the lower part is melting tank. The flame comes from the burner through the port, which feds in preheated air to increase the flame effiency.
The heated air and gas flow into the pre-combustion room for mixing via this access after they flow out of the regenerator. This is also an access for the flue gas to flow into the regenerator from the flame space.
Batched materials feed into the furnace through dog house, the heat is transferred via flame space to the glass liquid.
It is a part for cooling and homogenization of the glass liquid, which is also an access for glass liquid distribution.
A waste heat recovery device is designed for improving the flame temperature of furnace, which could heat the combustion air and gas by using the waste heat and then to increase the flame temperature and save energy.
4. Supply Scope
| Item | Description |
| 1 |
Project consulting |
| 2 |
Feasibility study and preliminary planning |
| 3 |
Engineering design |
| 4 | Supply of equipment and materials |
| 5 | Supervision of furnace and equipment installation |
| 6 | Furnace heating up and insulation |
| 7 | Furnace and equipment commissioning |
| 8 | Training |
6. Packing and Shipping
JEFFER has rich experiences on experiences of products packing , loading and delivery via various transportations.
|
|
|
|
7. FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.
Q:Can you offer design service?
A: Yes, we could design full solution drawings as per your requirements.
Q: Can you customize the products?
A: Yes, we have an experienced professional team ready to make design according to the requirement of customers.
Q: How can I get the price
A: For product line, please provide the detailed specfication of the production you want to product, then we will privode an economic plan for your reference. For engineering service, please provide your requirement, we will provide the detailed schedule and plan for your reference.
Video
Video
Video
Video
Video
Video
