Dual Fuel 380V ISO14001 Cross Fired Glass Melter

Dual Fuel Combustion , Cross Fired Furance, Glass Melter For Glass Product

1. Brief Introduction

Glass is a special amorphous inorganic nonmetallic material. The main component is silicate, a non-crystalline solid with an irregular structure.

Glass was used for windows and doors by the Ancient Romans as early as the 4th century.

The direction of flames of a cross fired furnace is from one side to the other side, which is across the width of the furnace and perpendicular with the flow direction of glass liquid.

The components of batched materials will produce a physicochemical solid phase reaction during heating process, in which the gaseous products will be released from the batched materials and produce a new opacity sinter ultimately, which is formed by silicate and SiO2.

2. Factors that influence the melting effects

3. Process

4. Main component

• Melting tank

The melting tank is combined with melting area and clearing area.

• Regenerator

The regenerator as a waste heat recovery device, the combustion air flows through the regenerator, after preheated, it will arrive at the furnace through the port.

• Port

It is the place where the fuel is mixed with the preheated air, also an access for the preheated air in to the furnace and exhausting the

waste gas out.

• Batch charging area

The dimension of batch charging area is determined by the different size of furnace and batching methods.

• Throat

Throat is a core section of the furnace, it will affect the quality of glass and furnace campaign. The temperature of glass will reduce when flowing through the throat.